6105-00-761-2152
Motor,Alternating Current
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 1372E183 | 00462 | Goodrich Corporation Dba Trw Lucas Aerospace | 3 | 9 |
| 128SCAM101-183 | 26512 | Northrop Grumman Systems Corporation | 5 | 9 |
| 128SCAM101-183 | 79RG9 | Northrop Grumman Systems Corporation | C | 1 |
Goodrich Corporation Dba Trw Lucas Aerospace
CAGE 00462Northrop Grumman Systems Corporation
CAGE 26512Northrop Grumman Systems Corporation
CAGE 79RG9DEMIL
Q
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.4980 INCHES NOMINAL SINGLE END |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | EXPLOSION PROOF |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 1.5 INCH-POUNDS RUNNING AND 2.1 INCH-POUNDS STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | SPLINED SINGLE END |
| CWFX | ROTOR SPEED RATING IN RPM | 11000.0 SINGLE FULL LOAD |
| CWGL | CURRENT RATING IN AMPS | 4.500 SINGLE INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 200.0 LINE TO NEUTRAL SINGLE INPUT |
| FAAZ | PHASE | THREE INPUT |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 6105-00-761-2152
NSN 6105-00-761-2152 is a National Stock Number assigned to Motor,Alternating Current. This NSN part number belongs to Federal Supply Class 6105 (MOTORS, ELECTRICAL) under Federal Supply Group 61 (ELECTRIC WIRE, AND POWER AND DISTRIBUTION EQUIPMENT). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 6105-00-761-2152, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.