NSN
5990-00-099-0700
Resolver,Electrical
FSC 5990 — SYNCHROS AND RESOLVERSFSG 59 — ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS
2 parts / 1 mfrs
Part Numbers for NSN 5990-00-099-07002 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 9V-11R41N40A | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-R-23417/25 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Manufacturers (1)
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.4130 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9745 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABRY | LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| ABWV | SHAFT DIAMETER | 0.1900 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5450 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 85.0 CELSIUS |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 9.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 4000.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 2.6 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 10.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 3720.00 MINIMUM AND 4467.00 MAXIMUM |
| AJTC | ZSS RESISTANCE IN OHMS | 121.00 MINIMUM AND 145.00 MAXIMUM |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 68.00 MINIMUM AND 73.00 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 65.00 MINIMUM AND 69.00 MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2550 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.497 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| MATT | MATERIAL | STEEL CORROSION RESISTING BODY |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-23417 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-23417/25 GOVERNMENT SPECIFICATION |
Related NSNs in FSC 5990
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5990-00-099-0700
NIIN000990700
FSC5990
DEMILA
PARTS2
MFRS1
About NSN 5990-00-099-0700
NSN 5990-00-099-0700 is a National Stock Number assigned to Resolver,Electrical. This NSN part number belongs to Federal Supply Class 5990 (SYNCHROS AND RESOLVERS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5990-00-099-0700, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.