5985-01-510-7364
Attenuator,Fixed
3 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| M3933/16-44 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| M3933/16-44N | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-DTL-3933/16 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AAQL | BODY STYLE | ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE |
| ABHP | OVERALL LENGTH | 1.240 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.350 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.15 AND 1.20 AND 1.25 AND 1.35 |
| AHTY | INPUT IMPEDANCE RATING IN OHMS | 50.0 |
| AHTZ | OUTPUT IMPEDANCE RATING IN OHMS | 50.0 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| AJDB | POWER RATING | 0.5 KILOWATTS PEAK |
| AJDK | RF SIGNAL ATTENUATION IN DECIBELS | 19.0 |
| AKNK | VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE | +0.0 TO 4.0 GIGAHERTZ AND +4.0 TO 8.0 GIGAHERTZ AND +8.0 TO 12.4 GIGAHERTZ AND +12.4 TO 18.0 GIGAHERTZ |
| ASYE | ATTENUATION ACCURACY REFERENCE FREQUENCY | 18.0 GIGAHERTZ |
| ASYN | ATTENUATION ACCURACY IN DECIBELS | -0.70 TO 0.70 |
| ASZM | TEMPERATURE SENSITIVITY ATTENUATION IN DECIBELS | 0.0006 |
| ASZN | CONNECTION TYPE PER FUNCTION | FEMALE INPUT AND MALE OUTPUT |
| AXGY | MOUNTING METHOD | TERMINAL |
| BBHS | TERMINAL TYPE AND QUANTITY | 2 CONNECTOR |
| BNGR | FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM |
| FEAT | SPECIAL FEATURES | NONSCREENED |
| MATT | MATERIAL | ALUMINUM ALLOY AND COPPER ALLOY 260 AND COPPER ALLOY AND MAGNESIUM ALLOY BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMP 2,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE BODY |
| TEST | TEST DATA DOCUMENT | 81349-MIL-DTL-3933 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-3933/16 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5985-01-510-7364
NSN 5985-01-510-7364 is a National Stock Number assigned to Attenuator,Fixed. This NSN part number belongs to Federal Supply Class 5985 (ANTENNAS, WAVEGUIDES, AND RELATED EQUIPMENT) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5985-01-510-7364, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.