5962-01-084-0560
Microcircuit,Linear
2 parts / 2 mfrs
Siliconix Incorporated Div Siliconix
CAGE 17856Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200DEMIL
Q
HMIC
N
PMIC
A
ESD/EMI
B
| MRC | Requirement | Reply |
|---|---|---|
| ADAQ | BODY LENGTH | 0.796 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 814.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| CBBL | FEATURES PROVIDED | NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND W/ENABLE AND HERMETICALLY SEALED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | 6 CHANNEL AND 7 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 DRIVER, SWITCH, FIELD EFFECT TRANSISTOR |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 6.0 VOLTS MAXIMUM POWER SOURCE |
| TEST | TEST DATA DOCUMENT | 19200-11745822 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5962-01-084-0560
NSN 5962-01-084-0560 is a National Stock Number assigned to Microcircuit,Linear. This NSN part number belongs to Federal Supply Class 5962 (MICROCIRCUITS, ELECTRONIC) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5962-01-084-0560, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.