5962-01-067-2818
Microcircuit,Linear
10 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| LM210H883B | 12040 | National Semiconductor Corp | C | 1 |
| LM310H | 17850 | Symmetricom Incs Analog Solutions Div | C | 1 |
| 5962-3810602BGB | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 1 |
| 5962-3810602BGX | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| JM38510/10602BGB | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| JM38510-10602BGX | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| M38510/10602BGB | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| M38510/10602BGX | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-M-38510/106 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| 10135941 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
National Semiconductor Corp
CAGE 12040Symmetricom Incs Analog Solutions Div
CAGE 17850Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Nimikkeistokeskus Ncb Finland
CAGE A486GDEMIL
Q
HMIC
N
PMIC
U
ESD/EMI
B
| MRC | Requirement | Reply |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 350.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| AGAV | END ITEM IDENTIFICATION | INDICATOR,PANORAMIC TYPE IP-1251/USQ |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND NEGATIVE OUTPUTS AND HIGH SPEED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 4 INPUT |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | A-1 MIL-M-38510 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 15.0 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 44.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-M-38510/106 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5962-01-067-2818
NSN 5962-01-067-2818 is a National Stock Number assigned to Microcircuit,Linear. This NSN part number belongs to Federal Supply Class 5962 (MICROCIRCUITS, ELECTRONIC) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 10 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5962-01-067-2818, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.