5955-00-945-1730
Crystal Unit,Quartz
3 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| CR-38A/U61.000KHZ | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| CR38A/U61K00000 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-C-3098/18 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.874 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.238 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.757 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.526 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.725 INCHES NOMINAL |
| ADPR | BODY THICKNESS | 0.317 INCHES NOMINAL |
| ADUM | OVERALL THICKNESS | 0.352 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.050 INCHES NOMINAL |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | 19.5 MINIMUM AND 20.5 MAXIMUM |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 4.0 MINIMUM AND 5.4 MAXIMUM |
| AEHG | SPECIFIED FREQUENCY | 61.000 KILOHERTZ |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -40.0 TO 70.0 CELSIUS |
| CQYL | DRIVE LEVEL RATING | 0.1000 MILLIWATTS NOMINAL AND 0.0999 MILLIWATTS MINIMUM AND 0.1001 MILLIWATTS MAXIMUM |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.012 TO 0.012 AND -0.050 TO 0.050 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 100000.0 NOMINAL |
| MATT | MATERIAL | GLASS COVER HOLDER |
| STYL | STYLE DESIGNATOR | TUBE BODY, WIRE LEADS |
| TEST | TEST DATA DOCUMENT | 81349-MILC3098/55 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5955-00-945-1730
NSN 5955-00-945-1730 is a National Stock Number assigned to Crystal Unit,Quartz. This NSN part number belongs to Federal Supply Class 5955 (OSCILLATORS AND PIEZOELECTRIC CRYSTALS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5955-00-945-1730, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.