5955-00-557-6511
Crystal Unit,Quartz
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| EM467-1 | 57057 | Navcom Defense Electronics, Inc. | 5 | 9 |
| CR-32A/U35.629630MHZ | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MILC3098-13 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Navcom Defense Electronics, Inc.
CAGE 57057Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
Q
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.023 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.248 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.757 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.775 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.725 INCHES MAXIMUM |
| ADPR | BODY THICKNESS | 0.317 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.352 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.050 INCHES MAXIMUM |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM |
| AEHG | SPECIFIED FREQUENCY | 35.62963 MEGAHERTZ |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEHM | CONTROLLED REFERENCE TEMP | 75.0 CELSIUS |
| AEHN | OPERABLE TEMP RANGE | -55.0 TO 90.0 CELSIUS |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES MAXIMUM |
| AFGA | OPERATING TEMP RANGE | +70.0 TO 80.0 CELSIUS |
| CQYL | DRIVE LEVEL RATING | 1.0 MILLIWATTS NOMINAL AND 0.8 MILLIWATTS MINIMUM AND 1.2 MILLIWATTS MAXIMUM |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 NOMINAL |
| STYL | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS |
| TEST | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5955-00-557-6511
NSN 5955-00-557-6511 is a National Stock Number assigned to Crystal Unit,Quartz. This NSN part number belongs to Federal Supply Class 5955 (OSCILLATORS AND PIEZOELECTRIC CRYSTALS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5955-00-557-6511, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.