5955-00-271-0769
Crystal Unit,Quartz
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MILC16TYPECR1AAR8007-270KC | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| CR1AAR | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
Q
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.750 INCHES MINIMUM AND 1.940 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.090 INCHES MINIMUM AND 1.170 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.155 INCHES MINIMUM AND 1.285 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.380 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | 34.5 MINIMUM AND 35.5 MAXIMUM |
| AEHG | SPECIFIED FREQUENCY | 8.00727 MEGAHERTZ |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 90.0 CELSIUS |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.020 TO 0.020 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 NOMINAL |
| MATT | MATERIAL | PLASTIC COVER HOLDER |
| STYL | STYLE DESIGNATOR | RECTANGULAR BODY, PIN TERMINALS |
| TEST | TEST DATA DOCUMENT | 81349-MILC16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5955-00-271-0769
NSN 5955-00-271-0769 is a National Stock Number assigned to Crystal Unit,Quartz. This NSN part number belongs to Federal Supply Class 5955 (OSCILLATORS AND PIEZOELECTRIC CRYSTALS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5955-00-271-0769, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.