5955-00-129-8208
Crystal Unit,Quartz
2 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| CR-6/U6.825000MHZ | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-C-10405/5 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.588 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.400 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.812 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.062 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.438 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.093 INCHES NOMINAL |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | 31.5 MINIMUM AND 32.5 MAXIMUM |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM |
| AEHG | SPECIFIED FREQUENCY | 6.825 MEGAHERTZ |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -40.0 TO 70.0 CELSIUS |
| CQYL | DRIVE LEVEL RATING | 8.0 MILLIWATTS MINIMUM AND 12.0 MILLIWATTS MAXIMUM |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.020 TO 0.020 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 65.0 MAXIMUM |
| MATT | MATERIAL | PLASTIC COVER HOLDER |
| STYL | STYLE DESIGNATOR | RECTANGULAR BODY, PIN TERMINALS |
| TEST | TEST DATA DOCUMENT | 81349-MIL-C-10405 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-C-10405/5 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5955-00-129-8208
NSN 5955-00-129-8208 is a National Stock Number assigned to Crystal Unit,Quartz. This NSN part number belongs to Federal Supply Class 5955 (OSCILLATORS AND PIEZOELECTRIC CRYSTALS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5955-00-129-8208, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.