5945-01-582-0332
Relay,Electromagnetic
3 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| M39016/15-068P | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-PRF-39016 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-PRF-39016/15 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
Q
HMIC
N
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.280 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.370 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC |
| AJLZ | FAILURE RATE SUFFIX LETTER | P |
| AKDX | WINDING QUANTITY | 1 |
| APCN | COIL QUANTITY | 1 |
| APNP | DUTY TYPE | CONTINUOUS |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 18.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 PIN GROUND |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD ENERGIZING ELEMENT AND CONTACTS |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5945-01-582-0332
NSN 5945-01-582-0332 is a National Stock Number assigned to Relay,Electromagnetic. This NSN part number belongs to Federal Supply Class 5945 (RELAYS AND SOLENOIDS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5945-01-582-0332, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.