5930-01-084-0800
Switch,Rotary
Unit Price
$13.04
per EA
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| SW2910 | 04426 | Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works | 3 | 2 |
| 0N500838-10 | 98230 | National Security Agency | 5 | 2 |
Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works
CAGE 04426National Security Agency
CAGE 98230| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $13.04 | EA | 0 |
| 01-OCT-2025 | $13.04 | EA | 0 |
DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AATB | WIDTH BETWEEN FLATS | 0.094 INCHES NOMINAL SINGLE ACTUATOR |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | 1.562 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.312 INCHES NOMINAL SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 0.936 INCHES MAXIMUM |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 OCLOCK |
| AFGA | OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| AGAV | END ITEM IDENTIFICATION | 5810010502501 01982 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 2 SINGLE SECTION FRONT |
| AKPY | THROW QUANTITY | 2 SINGLE SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT ALTITUDE |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT ALTITUDE |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 2 SINGLE SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND, PARALLEL FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | +0.320 TO 1.700 INCH-POUNDS SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 125.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CTHF | CONTACT LOAD CURRENT RATING | 20.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE |
| CTHF | CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD AND 10.0 MILLIAMPERES INDUCTIVE LOAD DC AT ALTITUDE |
| CTHF | CONTACT LOAD CURRENT RATING | 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| FEAT | SPECIAL FEATURES | SHAFT HAS NO. 2(0.086 IN.)-56 UNC-2B X 0.187 IN. MIN DEEP THD HOLE; SHAFT GROUNDED FOR RFI/EMI PROTECTION |
| STYL | STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5930-01-084-0800
NSN 5930-01-084-0800 is a National Stock Number assigned to Switch,Rotary. This NSN part number belongs to Federal Supply Class 5930 (SWITCHES) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 2 manufacturers.
The current government unit price for NSN 5930-01-084-0800 is $13.04. Price history shows 2 recorded price changes.
To find the part number for NSN 5930-01-084-0800, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.