NSN
5930-00-256-5082
Switch,Rotary
FSC 5930 — SWITCHESFSG 59 — ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS
3 parts / 3 mfrs
Part Numbers for NSN 5930-00-256-50823 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 44MS30-02-1-7N | 81073 | Grayhill Inc | 5 | 2 |
| 68150032001 | 89944 | Elbitamerica, Inc. | 3 | 2 |
| 1905M2-7NP | 91812 | Janco Corporation Dba Janco Corp Div Mason Controls | 5 | 2 |
Manufacturers (3)
Grayhill Inc
CAGE 81073Elbitamerica, Inc.
CAGE 89944Janco Corporation Dba Janco Corp Div Mason Controls
CAGE 91812Identification Data
DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ABHP | OVERALL LENGTH | 2.344 INCHES MINIMUM AND 2.424 INCHES MAXIMUM |
| ABNB | FIRST FLAT LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.215 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.306 INCHES MAXIMUM |
| AEFP | NONTURN DEVICE RADIUS | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 OCLOCK |
| AFBH | INDIVIDUAL SECTION QUANTITY | 2 |
| AFDC | NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| AFGA | OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 EACH SECTION FRONT |
| AKPY | THROW QUANTITY | 7 EACH SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 7 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | +8.000 TO 115.000 INCH-OUNCES SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CTHF | CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| STYL | STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-3786/4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
Related NSNs in FSC 5930
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5930-00-256-5082
NIIN002565082
FSC5930
DEMILA
PARTS3
MFRS3
Manufacturers
About NSN 5930-00-256-5082
NSN 5930-00-256-5082 is a National Stock Number assigned to Switch,Rotary. This NSN part number belongs to Federal Supply Class 5930 (SWITCHES) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5930-00-256-5082, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.