5920-00-581-7958
Fuseholder,Extractor Post
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 50503154 | 58854 | Gte Products Corp Lighting Products Group | C | 1 |
| FHN24U | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-F-19207/14 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Gte Products Corp Lighting Products Group
CAGE 58854Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
P
PMIC
S
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | FRONT PANEL MOUNTED TYPE |
| ABHP | OVERALL LENGTH | 2.531 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 1.765 INCHES MINIMUM AND 1.797 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AEVB | MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | 1.500 INCHES NOMINAL |
| AGUK | ACCOMMODATED FERRULE DIAMETER | 0.406 INCHES NOMINAL |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.718 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AGUV | CAP DIAMETER | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 1.296 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| AGVF | BUSHING HOLE DIAMETER | 0.875 INCHES MINIMUM AND 0.907 INCHES MAXIMUM |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| MATT | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS AND PLASTIC POLYESTER AND GLASS AND PLASTIC DIALLYL PHTHALATE AND GLASS BODY |
| MATT | MATERIAL | COPPER TERMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-P-14, TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-19833, TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| SFTT | SURFACE TREATMENT | SILVER CONTACT |
| SFTT | SURFACE TREATMENT | SOLDER AND TIN TERMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-F-19207/14 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5920-00-581-7958
NSN 5920-00-581-7958 is a National Stock Number assigned to Fuseholder,Extractor Post. This NSN part number belongs to Federal Supply Class 5920 (FUSES, ARRESTORS, ABSORBERS, AND PROTECTORS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5920-00-581-7958, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.