5910-01-182-2086
Capacitor,Fixed,Electrolytic
4 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| M39018-04-0083 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| M39018/04-2234M | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-C-39018/4 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-PRF-39018/4 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| ABPM | BODY DIAMETER | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 4.563 INCHES MINIMUM AND 4.687 INCHES MAXIMUM |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.190 INCHES NOMINAL |
| AEBU | TERMINAL HEIGHT FROM BODY | 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 2.7 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CQBQ | CAPACITANCE VALUE PER SECTION | 1000.000 MICROFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| CQLH | DC LEAKAGE AT MAXIMUM OPERATING TEMP | 4.5 MICROAMPERES |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 250.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 30.00 PERCENT SINGLE SECTION |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CWQC | EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.20 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | 0.750 MICROAMPERES |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| TEST | TEST DATA DOCUMENT | 81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 THREADED HOLE |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-C-39018/4 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5910-01-182-2086
NSN 5910-01-182-2086 is a National Stock Number assigned to Capacitor,Fixed,Electrolytic. This NSN part number belongs to Federal Supply Class 5910 (CAPACITORS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 4 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5910-01-182-2086, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.