5910-00-168-3463
Capacitor,Fixed,Plastic Dielectr
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| SMB597529-334 | 80063 | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir | 3 | 2 |
| SMB597529-334 | 96733 | Sfe Technologies | 5 | 9 |
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
CAGE 80063Sfe Technologies
CAGE 96733DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 2.120 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.750 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.375 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.250 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.330 MICROFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.5000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | PLASTIC CASE |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5910-00-168-3463
NSN 5910-00-168-3463 is a National Stock Number assigned to Capacitor,Fixed,Plastic Dielectr. This NSN part number belongs to Federal Supply Class 5910 (CAPACITORS) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5910-00-168-3463, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.