5905-01-474-0873
Resistor,Chip,Fixed,Film
2 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| D55342K07B910HR | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MIL-PRF-55342/7 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 910000.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| AAQZ | INCLOSURE METHOD | UNINCLOSED |
| AARB | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ADAQ | BODY LENGTH | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.118 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.015 INCHES MINIMUM AND 0.033 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR |
| STYL | STYLE DESIGNATOR | TERMINATION PAD EACH END |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5905-01-474-0873
NSN 5905-01-474-0873 is a National Stock Number assigned to Resistor,Chip,Fixed,Film. This NSN part number belongs to Federal Supply Class 5905 (RESISTOR) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5905-01-474-0873, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.