5905-01-258-9975
Resistor,Variable,Wire Wound,Non
Unit Price
$6.42
per EA
3 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-PRF-19/3 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MIL-R-19/3 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| RA30NBSA201A | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $6.42 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
B
| MRC | Requirement | Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 1.500 INCHES MINIMUM AND 1.710 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.500 INCHES MINIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.590 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 MINIMUM AND 305.0 MAXIMUM |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 280.0 MINIMUM AND 305.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | REAR-BOTTOM LOCATION NOT OTHERWISE SPECIFIED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-19 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-19/3 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5905-01-258-9975
NSN 5905-01-258-9975 is a National Stock Number assigned to Resistor,Variable,Wire Wound,Non. This NSN part number belongs to Federal Supply Class 5905 (RESISTOR) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 1 manufacturer.
The current government unit price for NSN 5905-01-258-9975 is $6.42.
To find the part number for NSN 5905-01-258-9975, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.