5905-00-900-4136
Resistor,Variable,Nonwire Wound,
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MILR22097-3 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| RJ22CP105 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| 410-4165 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Nimikkeistokeskus Ncb Finland
CAGE A486GDEMIL
A
HMIC
N
PMIC
U
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ABKW | OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.372 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.200 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/3 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5905-00-900-4136
NSN 5905-00-900-4136 is a National Stock Number assigned to Resistor,Variable,Nonwire Wound,. This NSN part number belongs to Federal Supply Class 5905 (RESISTOR) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5905-00-900-4136, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.