5905-00-882-6380
Resistor,Variable,Wire Wound,Non
5 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 275-1-202 | 80294 | Bourns Instruments Inc | 3 | 9 |
| 64A0000-005 | 94117 | Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems | 5 | 2 |
| 005912515 | D1876 | Elac Sonar Gmbh | 5 | 2 |
| 062800923 | D1876 | Elac Sonar Gmbh | 5 | 2 |
| RP548-05-202 | S3090 | Svenska Philips Ab | 5 | 9 |
Bourns Instruments Inc
CAGE 80294Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems
CAGE 94117Elac Sonar Gmbh
CAGE D1876Svenska Philips Ab
CAGE S3090DEMIL
A
HMIC
N
PMIC
G
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | SELF-LOCKING SHAFT |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5905-00-882-6380
NSN 5905-00-882-6380 is a National Stock Number assigned to Resistor,Variable,Wire Wound,Non. This NSN part number belongs to Federal Supply Class 5905 (RESISTOR) under Federal Supply Group 59 (ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS). There are 5 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5905-00-882-6380, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.