5360-01-112-5138
Spring,Helical,Extension
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-S-13572 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS24586-110 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.278 INCHES NOMINAL |
| ABQK | END STYLE | SHORT TWISTED HOOK BOTH ENDS |
| AGEK | SPRING FREE LENGTH | 1.207 INCHES NOMINAL |
| APCN | COIL QUANTITY | 13 |
| APGF | DESIGN TYPE | CLOSED |
| ASZD | LOAD RATING | 7.90 POUNDS MAXIMUM |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND OR LEFT-HAND |
| AXLP | SPRING DEFLECTION RATE | 9.990 POUNDS PER INCH NOMINAL |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 0.360 INCHES NOMINAL |
| AXMC | HOOK RADIUS | 0.139 INCHES NOMINAL BOTH ENDS |
| CSZP | SPRING LENGTH UNDER LOAD | 1.850 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5360-01-112-5138
NSN 5360-01-112-5138 is a National Stock Number assigned to Spring,Helical,Extension. This NSN part number belongs to Federal Supply Class 5360 (COIL, FLAT, LEAF, AND WIRE SPRINGS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5360-01-112-5138, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.