5360-00-920-3051
Spring,Helical,Torsion
4 parts / 4 mfrs
Air Armament Center/ En
CAGE 18894Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200Springfield Armory
CAGE 19205Department of the Air Force
CAGE 80049DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| ABQK | END STYLE | OFFSET EYE SECOND END |
| ABQK | END STYLE | STRAIGHT BEND END (RIGHT) FIRST END |
| AGEK | SPRING FREE LENGTH | 0.250 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| APCN | COIL QUANTITY | 4 |
| AXLH | COIL HELIX DIRECTION | LEFT-HAND |
| AXMH | END ANGULAR RELATIONSHIP | ENDS ANGLED ONE TO OTHER |
| CXTH | END LENGTH | 1.438 INCHES NOMINAL SECOND END |
| CXTH | END LENGTH | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM FIRST END |
| CXTM | END LENGTH FROM COIL AXIS TO FIRST BEND | 1.320 INCHES MINIMUM AND 1.380 INCHES MAXIMUM SECOND END |
| CXTN | END LENGTH FROM FIRST BEND TO SECOND BEND OR END | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM FIRST END |
| MATT | MATERIAL | STEEL UNS K08500 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE TORSION LEFT HAND |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5360-00-920-3051
NSN 5360-00-920-3051 is a National Stock Number assigned to Spring,Helical,Torsion. This NSN part number belongs to Federal Supply Class 5360 (COIL, FLAT, LEAF, AND WIRE SPRINGS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5360-00-920-3051, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.