5360-00-741-2506
Spring,Helical,Extension
4 parts / 4 mfrs
U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207Military Vehicles Opn General Motors Truck and Bus Group Ms 2603-02
CAGE 23862Colt Industries Inc Holley Automotive Div
CAGE 29092General Motors Llc Dba General Motors Llc
CAGE 7X677DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| ABPP | OPENING WIDTH | 0.250 INCHES NOMINAL BOTH ENDS |
| ABQK | END STYLE | DOBBY HOOK BOTH ENDS |
| AGEK | SPRING FREE LENGTH | 2.458 INCHES MINIMUM AND 2.460 INCHES MAXIMUM |
| APCN | COIL QUANTITY | 26 |
| APGF | DESIGN TYPE | CLOSED |
| ASZD | LOAD RATING | 4.500 POUNDS MINIMUM AND 5.500 POUNDS MAXIMUM |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND OR LEFT-HAND |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 0.302 INCHES NOMINAL |
| AXMC | HOOK RADIUS | 0.094 INCHES NOMINAL BOTH ENDS |
| CSZP | SPRING LENGTH UNDER LOAD | 2.880 INCHES NOMINAL |
| CXTJ | COIL TO HOOK INSIDE LENGTH | 0.656 INCHES NOMINAL BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 1078 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND ZINC OVERALL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5360-00-741-2506
NSN 5360-00-741-2506 is a National Stock Number assigned to Spring,Helical,Extension. This NSN part number belongs to Federal Supply Class 5360 (COIL, FLAT, LEAF, AND WIRE SPRINGS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5360-00-741-2506, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.