5360-00-209-8681
Spring,Helical,Compression
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 6008825 | 19200 | Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate | 3 | 2 |
| 6008825 | 19205 | Springfield Armory | 5 | 9 |
| 1005-600-8825 | A00AM | E.C.a Etablissement Central Des Approvisionnements Des Forces Armees Royales | 6 | 9 |
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200Springfield Armory
CAGE 19205E.C.a Etablissement Central Des Approvisionnements Des Forces Armees Royales
CAGE A00AMDEMIL
Q
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.450 INCHES MINIMUM |
| ABQK | END STYLE | SPRING END,SQUARED AND GROUND BOTH ENDS |
| AGEK | SPRING FREE LENGTH | 0.625 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AHQJ | ACCOMMODATED ROD DIAMETER | 0.440 INCHES NOMINAL |
| APCN | COIL QUANTITY | 4-1/2 |
| AXJQ | SPRING SOLID LENGTH | 0.415 INCHES NOMINAL |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND |
| AXLP | SPRING DEFLECTION RATE | 283.100 POUNDS PER INCH NOMINAL |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 0.660 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1085 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-13604-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5360-00-209-8681
NSN 5360-00-209-8681 is a National Stock Number assigned to Spring,Helical,Compression. This NSN part number belongs to Federal Supply Class 5360 (COIL, FLAT, LEAF, AND WIRE SPRINGS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5360-00-209-8681, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.