5340-01-419-1767
Clamp,Loop
4 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-C-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-DTL-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| AN742-14C | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| Z00.N7141060115 | F0086 | Daher Aerospace - Ex Socata | 5 | 9 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Daher Aerospace - Ex Socata
CAGE F0086DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.842 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.060 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-01-419-1767
NSN 5340-01-419-1767 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5340-01-419-1767, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.