5340-01-395-6153
Clamp,Loop
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-C-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-DTL-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS21106-36 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| ABMK | OVERALL WIDTH | 0.656 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.062 INCHES NOMINAL |
| AJRB | MATERIAL DIAMETER | 0.040 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.500 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.718 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 2.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL UNS T12001 BAND |
| MATT | MATERIAL | STEEL COMP 321 OR STEEL COMP 347 CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS21106-36 GOVERNMENT SPECIFICATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-01-395-6153
NSN 5340-01-395-6153 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5340-01-395-6153, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.