NSN
5340-01-353-7228
Bracket,Angle
FSC 5340 — HARDWARE, COMMERCIALFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5340-01-353-72281 records
Manufacturers (1)
Honeywell International Inc. Dba Honeywell International Div Aerospace - Phoenix
CAGE 99193Identification Data
DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | PACER DAWN |
| AHLF | SECOND LEG WIDTH | 1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| AHLZ | SECOND LEG SLOT LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.850 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.920 INCHES MINIMUM AND 0.960 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CHAMFERED ENDS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | CHAMFERED ENDS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CWPD | FIRST LEG CHAMFER ANGLE | 0.120 RADIANS NOMINAL |
| CWPG | SECOND LEG CHAMFER ANGLE | 0.120 RADIANS NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
Related NSNs in FSC 5340
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5340-01-353-7228
NIIN013537228
FSC5340
DEMILA
PARTS1
MFRS1
Manufacturers
About NSN 5340-01-353-7228
NSN 5340-01-353-7228 is a National Stock Number assigned to Bracket,Angle. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5340-01-353-7228, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.