5340-01-335-8196
Clamp,Loop
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-C-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-DTL-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS21919CJ1 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
P
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.020 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | PACER DAWN |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.436 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.421 INCHES MINIMUM AND 0.451 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL BAND |
| MATT | MATERIAL | RUBBER FLUOROSILICONE CLASS FQ CUSHION |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-01-335-8196
NSN 5340-01-335-8196 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5340-01-335-8196, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.