5340-01-316-8427
Clamp,Loop
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-C-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-DTL-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS21919WCF19 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT |
| ABMK | OVERALL WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.046 INCHES MINIMUM AND 1.076 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.248 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | CUSHION OZONE RESISTANT |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION |
| MATT | MATERIAL | STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 ASSN STD SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-01-316-8427
NSN 5340-01-316-8427 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5340-01-316-8427, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.