5340-01-042-5285
Clamp,Block,Section
Unit Price
$20.39
per EA
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| A51L21079-33 | 26512 | Northrop Grumman Systems Corporation | 5 | 9 |
| A51L21079-33 | 61174 | Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems | 3 | 9 |
| A51L21079-33 | 79RG9 | Northrop Grumman Systems Corporation | 3 | 2 |
Northrop Grumman Systems Corporation
CAGE 26512Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
CAGE 61174Northrop Grumman Systems Corporation
CAGE 79RG9| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $20.39 | EA | 0 |
| 01-OCT-2025 | $20.39 | EA | 0 |
DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.899 INCHES NOMINAL2.899 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.380 INCHES NOMINAL0.380 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 22 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.188 INCHES NOMINAL0.188 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 2.087 INCHES NOMINAL2.087 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S)UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | 0.375 INCHES NOMINAL0.375 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 55 |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM FIFTH HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM SECOND HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM THIRD HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM FIRST HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM FOURTH HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.562 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.250 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.593 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.070 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 1.578 INCHES NOMINAL |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | 2.086 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-01-042-5285
NSN 5340-01-042-5285 is a National Stock Number assigned to Clamp,Block,Section. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
The current government unit price for NSN 5340-01-042-5285 is $20.39. Price history shows 2 recorded price changes.
To find the part number for NSN 5340-01-042-5285, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.