NSN
5340-01-023-3953
Clamp,Loop
FSC 5340 — HARDWARE, COMMERCIALFSG 53 — HARDWARE AND ABRASIVES
2 parts / 2 mfrs
Part Numbers for NSN 5340-01-023-39532 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| TA1718WD16T | 84971 | Ta Aerospace Co Div Ta Aerospace | 3 | 2 |
| LS7357WDT16 | 98897 | Lockheed Martin Corp | 3 | 2 |
Manufacturers (2)
Ta Aerospace Co Div Ta Aerospace
CAGE 84971Lockheed Martin Corp
CAGE 98897Identification Data
DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.189 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.955 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.158 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | PLASTIC CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
Related NSNs in FSC 5340
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5340-01-023-3953
NIIN010233953
FSC5340
DEMILA
PARTS2
MFRS2
About NSN 5340-01-023-3953
NSN 5340-01-023-3953 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5340-01-023-3953, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.