NSN
5340-00-659-5032
Fastener,Pawl
FSC 5340 — HARDWARE, COMMERCIALFSG 53 — HARDWARE AND ABRASIVES
2 parts / 2 mfrs
Part Numbers for NSN 5340-00-659-50322 records
Manufacturers (2)
Lockheed Martin Corporation Div Rms
CAGE 03538General Electric Company
CAGE 24446Identification Data
DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| ABGL | WIDTH | 1.250 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.875 INCHES NOMINAL |
| ABRY | LENGTH | 1.531 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.250 INCHES NOMINAL |
| ABTH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES | 1.125 INCHES NOMINAL |
| AHRL | OPERATIONAL DIRECTION | LEFT-HAND OR RIGHT-HAND |
| CJRT | PAWL TYPE | OFFSET |
| CJRX | PAWL ACTUATION METHOD | KNOB |
| CJRZ | PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END | 1.344 INCHES NOMINAL |
| CJSC | KNOB LENGTH | 0.828 INCHES NOMINAL |
| CJSG | MOUNTING PLATE TO PAWL DISTANCE | 0.125 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| CZFU | PAWL SWING ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | HOLE QUANTITY:2 |
| HGTH | HEIGHT | 2.500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1010 AND IRON MALLEABLE OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
| STYL | STYLE DESIGNATOR | KNURLED |
Related NSNs in FSC 5340
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5340-00-659-5032
NIIN006595032
FSC5340
DEMILA
PARTS2
MFRS2
About NSN 5340-00-659-5032
NSN 5340-00-659-5032 is a National Stock Number assigned to Fastener,Pawl. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5340-00-659-5032, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.