5340-00-597-9408
Clamp,Loop
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN742-10C | 0AHP5 | Curtiss-Wright Controls, Inc. Div Actuation Division | 5 | 1 |
| C8603ANDTYPE4ANDCLASSB | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS21919F10 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| Z00.N7141060148 | F0086 | Daher Aerospace - Ex Socata | 5 | 9 |
Curtiss-Wright Controls, Inc. Div Actuation Division
CAGE 0AHP5Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Daher Aerospace - Ex Socata
CAGE F0086DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL, AROMATIC |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.654 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.842 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1006 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | CADMIUM BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND B CLASS |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Curtiss-Wright Controls, Inc. Div Actuation Division
CAGE 0AHP5
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Daher Aerospace - Ex Socata
CAGE F0086
About NSN 5340-00-597-9408
NSN 5340-00-597-9408 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5340-00-597-9408, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.