5340-00-221-3025
Clamp,Loop
5 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 2174D55 | 0AHP5 | Curtiss-Wright Controls, Inc. Div Actuation Division | 5 | 1 |
| MIL-C-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MIL-DTL-8603 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| AN742D18C | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| AN742D18CB | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 9 |
Curtiss-Wright Controls, Inc. Div Actuation Division
CAGE 0AHP5Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
P
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.051 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.908 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.126 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | RUBBER SYNTHETIC CUSHION |
| MATT | MATERIAL | ALUMINUM BONDING STRIP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | ANODIZE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | AN742D18CB PART |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5340-00-221-3025
NSN 5340-00-221-3025 is a National Stock Number assigned to Clamp,Loop. This NSN part number belongs to Federal Supply Class 5340 (HARDWARE, COMMERCIAL) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5340-00-221-3025, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.