5331-01-268-1250
O-Ring
4 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| LL-HX5-4417 | 14153 | Defense Logistics Agency Dba Defense Supply Center Philadelphia | 5 | 9 |
| NAS1602-904 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 5 | 9 |
| NAS1612-4 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 1 |
| 3-904E515-80 | D9182 | Zf Industrieantriebe Witten Gmbh | C | 1 |
Defense Logistics Agency Dba Defense Supply Center Philadelphia
CAGE 14153National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Zf Industrieantriebe Witten Gmbh
CAGE D9182DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| ADVN | CROSS-SECTIONAL HEIGHT | 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADYT | CENTER HOLE DIAMETER | 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| MATT | MATERIAL | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5331-01-268-1250
NSN 5331-01-268-1250 is a National Stock Number assigned to O-Ring. This NSN part number belongs to Federal Supply Class 5331 (O-RING) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5331-01-268-1250, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.