5320-00-655-7705
Rivet,Blind
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| PDR-173-100-12 | 18873 | Du Pont E I De Nemours and Co Inc Security Director/Legal Dept | 5 | 1 |
| MS20603D5P12 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Du Pont E I De Nemours and Co Inc Security Director/Legal Dept
CAGE 18873Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 0.417 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.170 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.106 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CQSX | SHEAR STRENGTH | 300 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2017 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OR OXIDE FILM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5320-00-655-7705
NSN 5320-00-655-7705 is a National Stock Number assigned to Rivet,Blind. This NSN part number belongs to Federal Supply Class 5320 (RIVETS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5320-00-655-7705, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.