5310-01-121-8528
Washer,Shouldered and Recessed
5 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 74A10551 | 13002 | Goodrich Corporation Div Advanced Structures Landing Systems | 5 | 9 |
| 74A10551 | 6K4C8 | Goodrich Corporation | 5 | 2 |
| 74A410551-2001 | 76301 | The Boeing Company Div Defense | 5 | 9 |
| 74A410551-2001 B | 76301 | The Boeing Company Div Defense | 3 | 2 |
| 10109388 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
Goodrich Corporation Div Advanced Structures Landing Systems
CAGE 13002Goodrich Corporation
CAGE 6K4C8The Boeing Company Div Defense
CAGE 76301Nimikkeistokeskus Ncb Finland
CAGE A486GDEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAUB | HOLE DIAMETER | 2.9700 INCHES MINIMUM AND 2.9750 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 3.1900 INCHES MINIMUM AND 3.1915 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 3.504 INCHES MINIMUM AND 3.506 INCHES MAXIMUM |
| ABMD | RECESS DIAMETER | 3.130 INCHES MINIMUM AND 3.135 INCHES MAXIMUM |
| ABMG | SHOULDER HEIGHT | 0.470 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.089 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| CSTM | RECESS ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES TOP |
| MATT | MATERIAL | COPPER ALLOY 172 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,TEMPER AT FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5310-01-121-8528
NSN 5310-01-121-8528 is a National Stock Number assigned to Washer,Shouldered and Recessed. This NSN part number belongs to Federal Supply Class 5310 (NUTS AND WASHERS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5310-01-121-8528, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.