NSN
5310-00-655-7545
Nut,Self-Locking,Plate
FSC 5310 — NUTS AND WASHERSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 2 mfrs
Part Numbers for NSN 5310-00-655-75452 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAJ24-02BC | 019L2 | Esna, Llc | 3 | 2 |
| NAJ24-02BC | 72962 | Harvard Industries Inc | 5 | 9 |
Manufacturers (2)
Esna, Llc
CAGE 019L2Harvard Industries Inc
CAGE 72962Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE |
| ACVN | NUT LENGTH | 1.032 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.348 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.500 INCHES NOMINAL |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BASE |
| MATT | MATERIAL | PLASTIC POLYAMIDE NYLON LOCKING INSERT |
| SFTT | SURFACE TREATMENT | ANODIZE NUT |
| SFTT | SURFACE TREATMENT | ANODIZE BASE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BASE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
Related NSNs in FSC 5310
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5310-00-655-7545
NIIN006557545
FSC5310
DEMILA
PARTS2
MFRS2
Manufacturers
About NSN 5310-00-655-7545
NSN 5310-00-655-7545 is a National Stock Number assigned to Nut,Self-Locking,Plate. This NSN part number belongs to Federal Supply Class 5310 (NUTS AND WASHERS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5310-00-655-7545, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.