NSN
5306-01-706-9840
Bolt,Shear
FSC 5306 — BOLTSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 1 mfrs
Part Numbers for NSN 5306-01-706-98402 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS1581C3R9P | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| NAS1581 REV 14 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | D | 9 |
Manufacturers (1)
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Identification Data
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.363 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.910 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.2578 INCHES MINIMUM AND 0.3047 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| ANEE | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, SHEAR, 100 DEG FLUSH REDUCED HEAD, OFFSET CRUCIFORM - RIBBED, 95 KSI FSU |
| FEAT | SPECIAL FEATURES | MATERIAL: CRES - A286 (UNS S66286) SHALL CONFORM TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737 OR AMS5853. FINISH: CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2. P = CADMIUM PLATE. R = FOLLOWING DIA DASH NUMBER INDICATES RIBBED OFFSET CRUCIFORM RECESS PER NASM14191. HEAT TREAT: AMS-H-81200 = 160-190 KSI FTU. |
| HZRD | HAZARDOUS SUBSTANCES | CADMIUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5732 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5737 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5853 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Related NSNs in FSC 5306
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5306-01-706-9840
NIIN017069840
FSC5306
DEMILA
PARTS2
MFRS1
About NSN 5306-01-706-9840
NSN 5306-01-706-9840 is a National Stock Number assigned to Bolt,Shear. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5306-01-706-9840, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.