NSN
5306-01-700-8144
Bolt,Shear
FSC 5306 — BOLTSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 1 mfrs
Part Numbers for NSN 5306-01-700-81442 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS6303 THRU NAS6320 REV 9 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | D | 9 |
| NAS6308-30D | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
Manufacturers (1)
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Identification Data
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.528 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.564 INCHES MINIMUM AND 2.609 INCHES MAXIMUM |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AASU | HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM THREADS |
| AHYM | NOMINAL THREAD DIAMETER | 0.5000 INCHES |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.131 INCHES NOMINAL THREADS |
| CSYT | CHAMFER ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, A286 CRES, SHORT THREAD, REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI FTU |
| FEAT | SPECIAL FEATURES | CRES - A286 (UNS S66286) CONFORMING TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737, OR AMS5853. NON-LOCKING. HEAT TREAT: 160 - 190 KSI FTU. NO FINISH CODE AFTER BASIC NUMBER FOR CADMIUM PLATED BOLTS. ADD "D" AFTER GRIP DASH NUMBER FOR DRILLED SHANK BOLTS. CADMIUM PLATED - CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2. IDENTIFY WITH GREEN DYE OR PAINT ON THE THREAD END. |
| HUES | COLOR | GREEN THREADS |
| HZRD | HAZARDOUS SUBSTANCES | CADMIUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5732 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS6303 THRU NAS6320 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Related NSNs in FSC 5306
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5306-01-700-8144
NIIN017008144
FSC5306
DEMILA
PARTS2
MFRS1
About NSN 5306-01-700-8144
NSN 5306-01-700-8144 is a National Stock Number assigned to Bolt,Shear. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5306-01-700-8144, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.