NSN
5306-01-335-2906
Bolt,Close Tolerance
FSC 5306 — BOLTSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5306-01-335-29061 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS21297H06009 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Manufacturers (1)
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Identification Data
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.666 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.221 INCHES MINIMUM AND 1.251 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.696 INCHES NOMINAL |
| AATD | EXTENDED WASHER THICKNESS | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAZH | HEAD MINOR DIAMETER | 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | PACER DAWN |
| AHYM | NOMINAL THREAD DIAMETER | 0.3750 INCHES |
| ANEE | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | HOLE DRILLED IN TOP CENTER OF HEAD,0.230/0.270 IN. DIA X 0.108 IN. NOMDEEP |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Related NSNs in FSC 5306
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5306-01-335-2906
NIIN013352906
FSC5306
DEMILA
PARTS1
MFRS1
About NSN 5306-01-335-2906
NSN 5306-01-335-2906 is a National Stock Number assigned to Bolt,Close Tolerance. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5306-01-335-2906, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.