5306-01-271-2522
Bolt,Close Tolerance
Unit Price
$36.13
per EA
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS27576-3-27 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| MS27576-3-27 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-JAN-2026 | $36.13 | EA | 0 |
| 01-JAN-2026 | $36.13 | EA | 0 |
| 01-JAN-2026 | $36.13 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.266 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.060 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT RING GRIP |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 1.688 INCHES MINIMUM AND 1.704 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.967 INCHES MINIMUM AND 1.997 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 6150 FASTENER |
| MATT | MATERIAL | STEEL COMP 630 OR STEEL COMP 631 OR STEEL COMP 440C LOCKING FEATURE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS5644 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE LOCKING FEATURE |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5306-01-271-2522
NSN 5306-01-271-2522 is a National Stock Number assigned to Bolt,Close Tolerance. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
The current government unit price for NSN 5306-01-271-2522 is $36.13. Price history shows 3 recorded price changes.
To find the part number for NSN 5306-01-271-2522, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.