5306-01-247-7599
Bolt,Machine
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS21134-05040 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| MS21134-05040 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.541 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 3.041 INCHES MINIMUM AND 3.071 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.266 INCHES MINIMUM AND 0.267 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.036 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| ANEE | GRIP LENGTH | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 11000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 6150 OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5620 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE AND AISI ASSN STD ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 11,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5306-01-247-7599
NSN 5306-01-247-7599 is a National Stock Number assigned to Bolt,Machine. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5306-01-247-7599, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.