NSN
5306-00-282-9359
Bolt,Internal Wrenching
FSC 5306 — BOLTSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5306-00-282-93591 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS147ADH56 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
Manufacturers (1)
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.788 INCHES MINIMUM AND 0.838 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM |
| AASK | HEAD STYLE | BEVEL-CONICAL |
| AASL | HEAD DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.407 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.070 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.194 INCHES MINIMUM AND 3.214 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 3140 OR STEEL COMP 3135 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS147 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Related NSNs in FSC 5306
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5306-00-282-9359
NIIN002829359
FSC5306
DEMILA
PARTS1
MFRS1
About NSN 5306-00-282-9359
NSN 5306-00-282-9359 is a National Stock Number assigned to Bolt,Internal Wrenching. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5306-00-282-9359, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.