5306-00-282-8976
Bolt,Eye
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN42-43 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| B6812 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| AN42-43 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.406 INCHES MINIMUM |
| AATK | EYE INSIDE DIAMETER | 0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.062 INCHES NOMINAL |
| AATR | SHANK LENGTH | 4.406 INCHES NOMINAL |
| AAUA | EYE STOCK THICKNESS | 0.094 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 0.438 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| ABHP | OVERALL LENGTH | 5.062 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CTWF | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 4.266 INCHES NOMINAL FIRST HOLE |
| CWXM | EYE OUTSIDE WIDTH | 0.438 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
About NSN 5306-00-282-8976
NSN 5306-00-282-8976 is a National Stock Number assigned to Bolt,Eye. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5306-00-282-8976, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.