NSN
5306-00-282-4356
Bolt,Internal Wrenching
FSC 5306 — BOLTSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5306-00-282-43561 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS154ADH54 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
Manufacturers (1)
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.172 INCHES MINIMUM AND 1.207 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.360 INCHES MINIMUM AND 3.390 INCHES MAXIMUM |
| AASK | HEAD STYLE | BEVEL-CONICAL |
| AASL | HEAD DIAMETER | 1.424 INCHES MINIMUM AND 1.438 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.846 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.070 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.875 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.7507 INCHES MINIMUM AND 0.7547 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.156 INCHES NOMINAL FIRST HOLE |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND C4 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 COMP C4 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 COND C4 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS154 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Related NSNs in FSC 5306
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5306-00-282-4356
NIIN002824356
FSC5306
DEMILA
PARTS1
MFRS1
About NSN 5306-00-282-4356
NSN 5306-00-282-4356 is a National Stock Number assigned to Bolt,Internal Wrenching. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5306-00-282-4356, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.