5306-00-271-6880
Bolt,Eye
4 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN42-21 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| AN42B21 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 5 | 2 |
| AN42-21 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 9 |
| AN42B21 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.406 INCHES MINIMUM |
| AATK | EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.062 INCHES NOMINAL |
| AATR | SHANK LENGTH | 2.156 INCHES NOMINAL |
| AAUA | EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.438 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| ABHP | OVERALL LENGTH | 2.812 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 2.560 INCHES NOMINAL |
| CWXM | EYE OUTSIDE WIDTH | 0.438 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STYL | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5306-00-271-6880
NSN 5306-00-271-6880 is a National Stock Number assigned to Bolt,Eye. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5306-00-271-6880, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.