5306-00-225-9447
Bolt,Internal Wrenching
Unit Price
$1.21
per EA
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS24677-42 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| FF-S-86 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS24677-42 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $1.21 | EA | 0 |
| 01-OCT-2025 | $1.21 | EA | 0 |
| 01-OCT-2025 | $1.21 | EA | 0 |
| 01-OCT-2025 | $1.21 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.210 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.210 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.047 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 150000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5306-00-225-9447
NSN 5306-00-225-9447 is a National Stock Number assigned to Bolt,Internal Wrenching. This NSN part number belongs to Federal Supply Class 5306 (BOLTS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
The current government unit price for NSN 5306-00-225-9447 is $1.21. Price history shows 4 recorded price changes.
To find the part number for NSN 5306-00-225-9447, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.