NSN
5305-01-494-4076
Screw,Close Tolerance
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5305-01-494-40761 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS1154E17D | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
Manufacturers (1)
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Identification Data
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.316 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.363 INCHES MINIMUM AND 1.393 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.946 INCHES NOMINAL FIRST HOLE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-01-494-4076
NIIN014944076
FSC5305
DEMILA
PARTS1
MFRS1
About NSN 5305-01-494-4076
NSN 5305-01-494-4076 is a National Stock Number assigned to Screw,Close Tolerance. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-01-494-4076, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.