5305-01-337-5470
Screw,Close Tolerance
Unit Price
$1.72
per EA
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| HT359RNE4-10 | 03950 | Naval Inventory Control Point Mechanicsburg | 3 | 2 |
| HT359RNE4-10 | 73197 | Hi-Shear Corporation | 3 | 2 |
Naval Inventory Control Point Mechanicsburg
CAGE 03950Hi-Shear Corporation
CAGE 73197| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $1.72 | EA | 0 |
| 01-OCT-2025 | $1.72 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.403 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.012 INCHES MINIMUM AND 1.059 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.475 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | O RING |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| SFTT | SURFACE TREATMENT | PHOSPHATE FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-01-337-5470
NSN 5305-01-337-5470 is a National Stock Number assigned to Screw,Close Tolerance. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
The current government unit price for NSN 5305-01-337-5470 is $1.72. Price history shows 2 recorded price changes.
To find the part number for NSN 5305-01-337-5470, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.