NSN
5305-01-328-2693
Screw,Cap,Socket Head
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5305-01-328-26931 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 16990-94C-4P3A | 56878 | Sps Technologies, Llc Dba Pb Fasteners | 3 | 2 |
Manufacturers (1)
Sps Technologies, Llc Dba Pb Fasteners
CAGE 56878Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.724 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.875 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.082 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.625 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| ZZZK | SPECIFICATION/STANDARD DATA | 56878-16990-94C-4+3A MANUFACTURERS STANDARD |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-01-328-2693
NIIN013282693
FSC5305
DEMILA
PARTS1
MFRS1
Manufacturers
About NSN 5305-01-328-2693
NSN 5305-01-328-2693 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-01-328-2693, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.